Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, busa stabil ngaliwatan sarana fisik atawa kimiawi. Nalika busa ieu tuntas dicampurkeun jeung slurry dumasar-semén (semén, lebu ngapung, jsb.) sareng diubaran sacara alami atanapi nganggo uap, eta ngabentuk novél bahan lightweight-busa beton-internal ngeusi sababaraha sél hawa katutup.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Rasio Multiplikasi Busa Tinggi: Rasio multiplikasi busa anu luhur ngamungkinkeun éncér sateuacan dianggo. Hiji kilogram konsentrasi ngahasilkeun volume badag busa seragam, delivering tabungan ongkos signifikan.

2. Stabilitas Busa Kuat: Ngahasilkeun tahan banting, tembok busa seragam rupa nu nolak runtuhna atawa pegatna. Éféktif tahan tekanan tina slurry semén, mastikeun bebas sarta disegel sél hawa dina produk rengse.

3. Seragam jeung Struktur Pori Halus: Beton busa nunjukkeun struktur internal idéal tina pori mikro buleud tertutup, ngajamin sipat fisik unggul.

4. Konsumsi Bahan Low: Ngahontal dénsitas sarimbag sareng sasmita kakuatan kalayan dosis anu langkung handap tibatan produk pasar standar, ngurangan waragad.

5. Eco-friendly jeung aman: Formulasi nétral, non-toksik, euweuh bauan, sarta non-corrosive, posing teu ngarugikeun lingkungan atawa kaséhatan manusa. Digolongkeun salaku bahan wangunan héjo.

6. adaptability lega: kasaluyuan alus teuing jeung rupa-rupa semén (kaasup semén Portland biasa na semén aluminate) jeung admixtures. Peta busa gancang kalayan stabilitas busa anu diperpanjang.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Spésifikasi produk

Mold Release Agent

Penampilan: Cairan amber jelas nepi ka caang
Kandungan padatan: 25–30%
Nilai pH: 6.5–8.0 (in ready-to-use form)
Rasio éncér: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Kasaluyuan: Works well with steel, kai, fiberglass, and plastic formwork
Panyimpenan: Tetep dina tiis, tempat garing antara 5 ° C sareng 35 ° C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Agen Foaming Beton

Penampilan: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
Nilai pH: 7.0–9.0
Rasio ékspansi busa: 20:1 ka 30:1 (volume busa kana volume larutan)
Stabilitas busa: Nahan struktur pikeun leuwih 60 minutes under standard test conditions
Dosage: 0.5–1.5 kg per cubic meter of lightweight concrete
Kasaluyuan: Mixes easily with ordinary Portland cement and common admixtures
Panyimpenan: Store between 0°C and 40°C; avoid freezing; usable up to 12 bulan lamun teu dibuka

agén foaming Ieu nyiptakeun stabil, gelembung hawa seragam dina campuran beton. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Tanpa aranjeunna, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, kolom, balok, jeung unsur pracetak. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Agen Foaming Beton: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, hateup decks, panels témbok, and road sub-bases. It saves material costs and eases transport and handling. Tambih deui, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Profil Perusahaan

Kami pamimpin global dina beton ringan sareng solusi busa direkayasa canggih. Dipikawanoh sacara global pikeun komitmenna pikeun panalungtikan, inovasi, jeung kaahlian dilarapkeun, kami geus nyadiakeun solusi busa direkayasa saprak mimiti 2012 urang.

Kami tiasa nyayogikeun campuran beton kualitas luhur sareng produk anu aya hubunganana beton busa di sakumna dunya.

Pausahaan ngabogaan departemén téknis profésional sarta departemén pangawasan kualitas, laboratorium anu dilengkepan ogé, sarta dilengkepan parabot nguji canggih tur sanggeus-jualan puseur layanan palanggan.

Upami anjeun kabetot, mangga ngarasa Luncat tur ngahubungan kami.

pangmayaran

T/T, persatuan urang Barat, Paypal, Kartu kiridit jsb.

Pangiriman

Ku hawa, ku laut, ku express, sakumaha pamundut konsumén.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Patarosan remen naroskeun

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Teu salawasna. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.