Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, apar egonkorra baliabide fisiko edo kimikoen bidez. Apar hori zementuzko mindarekin ondo nahasten denean (zementua, errauts hegan, etab.) eta naturalki edo lurrunez sendatu, material arin berri bat osatzen du —apar-hormigoia—, barrutik aire-zelula itxi ugariz betea.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Aparra biderkatze ratio altua: Aparra biderkatzeko ratio altua erabili aurretik diluitzeko aukera ematen du. Kilo kontzentratu batek apar uniforme bolumen handia sortzen du, kostu-aurrezki nabarmena emanez.

2. Apar-egonkortasun sendoa: Erresistenteak sortzen ditu, kolapsoari edo hausturari eusten dioten apar-hormak uniformeki finak. Zementu-mindaren presioa eraginkortasunez jasaten du, amaitutako produktuaren barruan aire-zelula independenteak eta itxiak bermatzea.

3. Poro Egitura Uniforme eta Fina: Apar-hormigoiak mikro-poro esferiko itxien barne-egitura ezin hobea erakusten du, goi-mailako propietate fisikoak bermatuz.

4. Material-kontsumo baxua: Merkatuko produktu estandarrak baino dosi baxuagoarekin dentsitate- eta indar-maila baliokideak lortzen ditu, kostuak murriztea.

5. Ekologikoa eta segurua: Formulazio neutroa, ez-toxikoak, usainik gabe, eta ez korrosiboak, ingurumenari edo giza osasunari kalterik eragin gabe. Eraikuntzarako material berde gisa sailkatuta.

6. Egokigarritasun zabala: Bateragarritasun bikaina hainbat zementurekin (Portland zementu arrunta eta aluminato zementu barne) eta nahasketak. Apar-ekintza azkarra apar-egonkortasun hedatuarekin.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Produktuaren zehaztapenak

Mold Release Agent

Itxura: Likido argi eta argi argia
Solidoen edukia: 25–30%
pH balioa: 6.5–8,0 (erabiltzeko prest dagoen moduan)
Diluzio-erlazioa: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Bateragarritasuna: Works well with steel, egurra, beira-zuntza, and plastic formwork
Biltegiratzea: Mantendu fresko batean, dry place between 5°C and 35°C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Hormigoizko apar-eragilea

Itxura: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH balioa: 7.0–9.0
Apar-hedapen-erlazioa: 20:1 to 30:1 (volume of foam to volume of solution)
Apar-egonkortasuna: Holds structure for over 60 minutes under standard test conditions
Dosia: 0.5–1.5 kg per cubic meter of lightweight concrete
Bateragarritasuna: Mixes easily with ordinary Portland cement and common admixtures
Biltegiratzea: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

Aparraren agente honek egonkorra sortzen du, aire-burbuila uniformeak hormigoi-nahasteetan. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Horiek gabe, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, zutabeak, habeak, eta elementu aurrefabrikatuak. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Hormigoizko apar-eragilea: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, teilatuak, horma-panelak, and road sub-bases. It saves material costs and eases transport and handling. Gainera, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Enpresaren profila

Hormigoi arinean eta ingeniaritza-apar-soluzio aurreratuenetan liderra gara. Mundu mailan ezaguna da ikerketarekin duen konpromisoagatik, berrikuntza, eta esperientzia aplikatua, 2012. urte hasieratik ingeniaritza-apar soluzioak eskaintzen ari gara.

Kalitate handiko hormigoizko nahasketa eta apar-hormigoiarekin lotutako produktuak horni ditzakegu mundu osoan.

Enpresak sail tekniko profesionala eta kalitatea gainbegiratzeko saila ditu, ondo hornitutako laborategia, eta proba-ekipo aurreratuekin eta salmenta osteko bezeroarentzako arreta-zentroarekin hornitua.

Interesatzen bazaizu, mesedez, lasai eta jarri gurekin harremanetan.

Ordainketa

T/T, Western Union, Paypal, Kreditu txartela etab.

Bidalketa

Airez, itsasoz, espresaren bidez, bezeroek eskatzen duten moduan.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Maiz egiten diren galderak

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Zergatik erabili hormigoizko apar-agente bat?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Ez beti. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.