Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, جسماني يا ڪيميائي ذريعن ذريعي مستحڪم فوم. جڏهن ته هن فوم کي چڱيءَ طرح سيمينٽ تي ٻڌل slurry سان ملايو ويندو آهي (سيمينٽ, اڏامڻ, وغيره) ۽ قدرتي طور تي يا ٻاڦ سان علاج, اهو هڪ نئون هلڪو وزن وارو مواد ٺاهي ٿو - فوم ڪنڪريٽ - اندروني طور تي ڪيترن ئي بند ٿيل هوائي سيلن سان ڀريل.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. هاء فوم ضرب جي نسبت: هاء فوم ضرب جي نسبت استعمال ڪرڻ کان اڳ گھٽائڻ جي اجازت ڏئي ٿي. هڪ ڪلوگرام ڪنسنٽريٽ هڪ وڏي مقدار ۾ يونيفارم فوم ٺاهي ٿو, اهم خرچ بچت پهچائڻ.

2. مضبوط فوم استحڪام: لچڪدار پيدا ڪري ٿي, هڪجهڙائي سان ٺيڪ فوم جون ڀتيون جيڪي ٽٽڻ يا ڀڃڻ جي مزاحمت ڪن ٿيون. مؤثر طور تي سيمينٽ slurry کان دٻاء برداشت, مڪمل پيداوار جي اندر آزاد ۽ سيل ٿيل ايئر سيلز کي يقيني بڻائڻ.

3. يونيفارم ۽ سٺي پور جي جوڙجڪ: فوم ڪنڪريٽ هڪ مثالي اندروني ڍانچي کي بند اسپيريل مائڪرو پورز جي نمائش ڪري ٿو, اعلي جسماني ملڪيت جي ضمانت.

4. گھٽ مواد واپرائڻ: معياري مارڪيٽ جي شين جي ڀيٽ ۾ گھٽ مقدار سان برابر کثافت ۽ طاقت گريڊ حاصل ڪري ٿو, خرچ گھٽائڻ.

5. ماحول دوست ۽ محفوظ: غير جانبدار فارموليشن, غير زهر, بي بوءِ, ۽ غير corrosive, ماحول يا انساني صحت کي ڪو به نقصان نه پهچايو. سائي عمارت جي مواد جي طور تي درجه بندي.

6. وسيع adaptability: مختلف سيمينٽ سان بهترين مطابقت (عام پورٽلينڊ سيمينٽ ۽ ايلومينيٽ سيمينٽ سميت) ۽ مرکبات. وڌايل فوم استحڪام سان تيز فومنگ عمل.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

پيداوار جي وضاحت

Mold Release Agent

ظاهر: صاف کان هلڪو امبر مائع
سولڊ مواد: 25–30%
pH قدر: 6.5–8.0 (in ready-to-use form)
گھٽتائي جو تناسب: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
مطابقت: Works well with steel, ڪاٺ, فائبر گلاس, ۽ پلاسٽڪ فارم ورڪ
ذخيرو: ٿڌي ۾ رکو, سڪي جڳهه 5 ° C ۽ 35 ° C جي وچ ۾; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

ڪنڪريٽ فومنگ ايجنٽ

ظاهر: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH قدر: 7.0-9.0
فوم توسيع تناسب: 20:1 جي طرف 30:1 (حل جي مقدار تائين فوم جو مقدار)
فوم استحڪام: ڍانچي کي ختم ڪري ٿو 60 minutes under standard test conditions
دوز: 0.5–1.5 kg per cubic meter of lightweight concrete
مطابقت: Mixes easily with ordinary Portland cement and common admixtures
ذخيرو: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

هن foaming ايجنٽ مستحڪم بڻائي ٿو, ڪنڪريٽ جي ميلاپ ۾ يونيفارم ايئر بلبل. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. انهن کان سواء, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, ڪالم, شعاع, ۽ اڳڪٿي عناصر. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

ڪنڪريٽ فومنگ ايجنٽ: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, ڇت جي ڇت, ڀت پينل, and road sub-bases. It saves material costs and eases transport and handling. پلس, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

ڪمپني پروفائل

اسان ٿلهي ڪنڪريٽ ۽ جديد انجنيئر فوم حل ۾ عالمي اڳواڻ آهيون. تحقيق جي عزم لاء عالمي سطح تي سڃاتو وڃي ٿو, جدت, ۽ لاڳو ڪيل مهارت, اسان 2012 جي شروعات کان وٺي انجنيئر فوم حل فراهم ڪري رهيا آهيون.

اسان سڄي دنيا ۾ اعلي معيار جي ڪنڪريٽ ملائڻ ۽ فوم ڪنڪريٽ سان لاڳاپيل مصنوعات فراهم ڪري سگهون ٿا.

ڪمپني وٽ هڪ پیشہ ور ٽيڪنيڪل ڊپارٽمينٽ ۽ معيار جي نگراني واري کاتي آهي, هڪ چڱي طرح ليس ليبارٽري, ۽ جديد جاچ سامان سان ليس ۽ پوء-سيلز ڪسٽمر سروس سينٽر.

جيڪڏھن توھان دلچسپي وٺندا آھيو, مهرباني ڪري آزاد محسوس ڪريو ۽ اسان سان رابطو ڪريو.

ادائگي

ٽي/ٽي, ويسٽرن يونين, پي پال, ڪريڊٽ ڪارڊ وغيره.

ترسيل

هوا ذريعي, سمنڊ ذريعي, اظهار ذريعي, جيئن گراهڪن جي درخواست.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

اڪثر پڇيا ويا سوال

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

هميشه نه. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.