Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, stabiilne vaht füüsikaliste või keemiliste vahenditega. Kui see vaht segatakse põhjalikult tsemendipõhise lägaga (tsement, lendtuhk, jne.) ja kuivatatakse looduslikult või auruga, see moodustab uudse kerge materjali – vahtbetooni – sisemiselt täidetud arvukate suletud õhurakkudega.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Kõrge vahu korrutussuhe: Vahu kõrge korrutussuhe võimaldab enne kasutamist lahjendada. Üks kilogramm kontsentraati tekitab suure koguse ühtlast vahtu, pakkudes märkimisväärset kulude kokkuhoidu.

2. Tugev vahu stabiilsus: Toodab elastset, ühtlaselt peened vahtseinad, mis on varisemis- või purunemiskindlad. Talub tõhusalt tsemendilobri survet, sõltumatute ja suletud õhurakkude tagamine valmistootes.

3. Ühtlane ja peenpoorne struktuur: Vahtbetoonil on ideaalne suletud sfääriliste mikropooride sisemine struktuur, tagades suurepärased füüsikalised omadused.

4. Madal materjalikulu: Saavutab samaväärse tiheduse ja tugevuse klassid väiksema doosiga kui standardsed turutooted, kulude vähendamine.

5. Keskkonnasõbralik ja ohutu: Neutraalne koostis, mittetoksiline, lõhnatu, ja mittesöövitav, ei kahjusta keskkonda ega inimeste tervist. Klassifitseeritud roheliseks ehitusmaterjaliks.

6. Lai kohanemisvõime: Suurepärane ühilduvus erinevate tsementidega (sealhulgas tavaline portlandtsement ja aluminaattsement) ja lisandid. Kiire vahutav toime koos pikendatud vahu stabiilsusega.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Toote spetsifikatsioonid

Mold Release Agent

Välimus: Selge kuni hele merevaigukollane vedelik
Tahkete ainete sisaldus: 25–30%
pH väärtus: 6.5–8,0 (kasutusvalmis kujul)
Lahjendussuhe: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Ühilduvus: Works well with steel, puit, klaaskiud, and plastic formwork
Säilitamine: Hoida jahedas, kuivas kohas temperatuuril 5°C kuni 35°C; shelf life of 12 kuud suletud originaalpakendis

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Betooni vahutav aine

Välimus: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH väärtus: 7.0–9.0
Vahu paisumissuhe: 20:1 juurde 30:1 (volume of foam to volume of solution)
Vahu stabiilsus: Hoiab struktuuri üle 60 minutes under standard test conditions
Annustamine: 0.5–1.5 kg per cubic meter of lightweight concrete
Ühilduvus: Mixes easily with ordinary Portland cement and common admixtures
Säilitamine: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

See vahutav aine loob stabiilse, ühtlased õhumullid betoonisegudes. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Ilma nendeta, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, veerud, talad, ja monteeritavad elemendid. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Betooni vahutav aine: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, katusetekid, seinapaneelid, and road sub-bases. It saves material costs and eases transport and handling. Pluss, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Ettevõtte profiil

Oleme kergbetooni ja täiustatud vahtplastlahenduste alal ülemaailmne liider. Ülemaailmselt tuntud oma pühendumuse poolest teadusuuringutele, uuenduslikkust, ja rakendatud ekspertiis, oleme pakkunud vahtplastlahendusi alates 2012. aasta algusest.

Saame tarnida kvaliteetseid betoonisegu ja vahtbetooniga seotud tooteid üle kogu maailma.

Ettevõttel on professionaalne tehniline osakond ja kvaliteedijärelevalve osakond, hästi varustatud labor, ning varustatud täiustatud testimisseadmete ja müügijärgse klienditeeninduskeskusega.

Kui olete huvitatud, palun võtke meiega ühendust.

Makse

T/T, Western Union, Paypal, Krediitkaart jne.

Saadetis

Õhuga, meritsi, ekspressi teel, vastavalt klientide soovile.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Korduma kippuvad küsimused

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Miks kasutada betooni vahutavat ainet?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Mitte alati. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.