Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Cov Khoom Lag Luam Tshwj Xeeb

Mold Release Agent

Appearance: Clear to light amber liquid
Cov ntsiab lus Solids: 25–30%
pH Value: 6.5–8.0 (in ready-to-use form)
Dilution Ratio: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Compatibility: Works well with steel, wood, fiberglass, and plastic formwork
Cia: Khaws cia hauv qhov txias, qhov chaw qhuav ntawm 5 ° C thiab 35 ° C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Qhob Ua Npuas Ncauj Agent

Appearance: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH Value: 7.0–9.0
Ua npuas ncauj nthuav dav ratio: 20:1 rau 30:1 (volume of foam to volume of solution)
Foam Stability: Holds structure for over 60 minutes under standard test conditions
Dosage: 0.5–1.5 kg per cubic meter of lightweight concrete
Compatibility: Mixes easily with ordinary Portland cement and common admixtures
Cia: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

Tus neeg sawv cev foaming no ua kom ruaj khov, Uniform cua npuas nyob rau hauv qhob sib tov. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Yog tsis muaj lawv, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, m, beams, thiab precast ntsiab. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Qhob Ua Npuas Ncauj Agent: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, a, wall panels, and road sub-bases. It saves material costs and eases transport and handling. Tsis tas li ntawd, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Company Profile

Peb yog tus thawj coj thoob ntiaj teb hauv lub teeb yuag qhob thiab advanced engineered ua npuas ncauj daws teeb meem. Renowned thoob ntiaj teb rau peb txoj kev cog lus rau kev tshawb fawb, innovation, thiab applied kev txawj ntse, Peb tau xa engineered ua npuas ncauj daws txij thaum ntxov 2010s.

Peb tuaj yeem muab cov khoom lag luam zoo thiab ua npuas ncauj qhob ntsig txog cov khoom lag luam thoob ntiaj teb.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Them nyiaj

T / T, Western Union, PayPal, Credit Card thiab lwm yam.

Shipment

Los ntawm huab cua, los ntawm hiav txwv, los ntawm kev nthuav tawm, raws li cov neeg siv khoom thov.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Cov Lus Nquag Nug

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Tsis yog ib txwm. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.