Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, Espuma estable por medios físicos o químicos.. Cuando esta espuma se mezcla completamente con una lechada a base de cemento (cemento, cenizas volantes, etc.) y curado de forma natural o con vapor, Forma un novedoso material liviano, el hormigón celular, lleno internamente de numerosas celdas de aire cerradas..

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Alta proporción de multiplicación de espuma: La alta proporción de multiplicación de espuma permite la dilución antes de su uso.. Un kilogramo de concentrado genera un gran volumen de espuma uniforme, ofreciendo importantes ahorros de costes.

2. Fuerte estabilidad de la espuma: Produce resistente, Paredes de espuma uniformemente finas que resisten el colapso o la rotura.. Resiste eficazmente la presión de la lechada de cemento., asegurando celdas de aire independientes y selladas dentro del producto terminado.

3. Estructura de poros uniforme y fina: El hormigón celular presenta una estructura interna ideal de microporos esféricos cerrados., garantizando propiedades físicas superiores.

4. Bajo consumo de materiales: Logra grados de densidad y resistencia equivalentes con dosis más bajas que los productos estándar del mercado., reduciendo costos.

5. Ecológico y seguro: Formulación neutra, no tóxico, inodoro, y no corrosivo, no suponer ningún daño para el medio ambiente o la salud humana. Clasificado como material de construcción ecológico..

6. Amplia adaptabilidad: Excelente compatibilidad con varios cementos. (incluido el cemento Portland ordinario y el cemento de aluminato.) y aditivos. Acción espumante rápida con estabilidad extendida de la espuma..

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Especificaciones del producto

Mold Release Agent

Apariencia: Líquido claro a ámbar claro
Contenido de sólidos: 25–30%
Valor de pH: 6.5–8.0 (en forma lista para usar)
Relación de dilución: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Compatibilidad: Works well with steel, madera, fibra de vidrio, and plastic formwork
Almacenamiento: Mantener en un lugar fresco, lugar seco entre 5°C y 35°C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Agente espumante para hormigón

Apariencia: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
Valor de pH: 7.0–9.0
Relación de expansión de la espuma: 20:1 a 30:1 (volume of foam to volume of solution)
Estabilidad de la espuma: Holds structure for over 60 minutes under standard test conditions
Dosificación: 0.5–1.5 kg per cubic meter of lightweight concrete
Compatibilidad: Mixes easily with ordinary Portland cement and common admixtures
Almacenamiento: Store between 0°C and 40°C; evitar la congelación; usable up to 12 months if unopened

Este agente espumante crea estabilidad., Burbujas de aire uniformes en mezclas de concreto.. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. sin ellos, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, columnas, vigas, y elementos prefabricados. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Agente espumante para hormigón: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, cubiertas de techo, paneles de pared, and road sub-bases. It saves material costs and eases transport and handling. Más, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Perfil de la empresa

Somos el líder mundial en soluciones de concreto liviano y espuma de ingeniería avanzada.. Conocida mundialmente por su compromiso con la investigación, innovación, y experiencia aplicada, Hemos estado brindando soluciones de espuma de ingeniería desde principios de 2012..

Podemos suministrar aditivos para hormigón y productos relacionados con hormigón celular de alta calidad en todo el mundo..

La empresa cuenta con un departamento técnico profesional y un departamento de supervisión de calidad., un laboratorio bien equipado, y equipado con equipos de prueba avanzados y centro de servicio al cliente posventa.

Si estas interesado, por favor siéntete libre y contáctanos.

Pago

T/T, Western Union, PayPal, Tarjeta de crédito, etc..

Envío

En avión, por mar, por expreso, como los clientes lo solicitan.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Preguntas frecuentes

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

No siempre. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.