Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, povu imara kwa njia ya kimwili au kemikali. Wakati povu hii imechanganywa kabisa na tope la saruji (saruji, kuruka majivu, nk.) na kutibiwa kwa asili au kwa mvuke, huunda nyenzo mpya nyepesi-saruji ya povu-iliyojazwa ndani na seli nyingi za hewa zilizofungwa.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Uwiano wa Kuzidisha wa Povu ya Juu: Uwiano wa juu wa kuzidisha povu inaruhusu dilution kabla ya matumizi. Kilo moja ya mkusanyiko hutoa kiasi kikubwa cha povu sare, kutoa akiba kubwa ya gharama.

2. Utulivu wa Povu wenye Nguvu: Inazalisha ustahimilivu, kuta laini za povu zinazostahimili kuanguka au kuvunjika. Inastahimili shinikizo kutoka kwa tope la saruji, kuhakikisha seli za hewa za kujitegemea na zilizofungwa ndani ya bidhaa iliyokamilishwa.

3. Muundo wa Pore Sare na Nzuri: Saruji ya povu inaonyesha muundo bora wa ndani wa pores ndogo za spherical zilizofungwa, kuhakikisha sifa bora za kimwili.

4. Matumizi ya chini ya nyenzo: Hufikia viwango sawa vya msongamano na nguvu kwa kutumia kipimo cha chini kuliko bidhaa za kawaida za soko, kupunguza gharama.

5. Inafaa kwa mazingira na salama: Uundaji wa upande wowote, isiyo na sumu, isiyo na harufu, na yasiyo ya kutu, haileti madhara kwa mazingira au afya ya binadamu. Imeainishwa kama nyenzo ya ujenzi ya kijani kibichi.

6. Kubadilika kwa upana: Utangamano bora na saruji mbalimbali (ikiwa ni pamoja na saruji ya kawaida ya Portland na saruji ya aluminate) na michanganyiko. Kitendo cha haraka cha kutoa povu na uthabiti wa povu uliopanuliwa.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Vipimo vya Bidhaa

Mold Release Agent

Muonekano: Kioevu kisicho na mwanga cha kaharabu
Maudhui Mango: 25–30%
Thamani ya pH: 6.5-8.0 (in ready-to-use form)
Uwiano wa Dilution: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Utangamano: Works well with steel, mbao, fiberglass, and plastic formwork
Hifadhi: Weka kwenye baridi, mahali pakavu kati ya 5°C na 35°C; shelf life of 12 miezi katika chombo cha awali kilichofungwa

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Ajenti wa Kutoa Mapovu ya Zege

Muonekano: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
Thamani ya pH: 7.0–9.0
Uwiano wa Upanuzi wa Povu: 20:1 kwa 30:1 (volume of foam to volume of solution)
Utulivu wa Povu: Inashikilia muundo kwa zaidi 60 minutes under standard test conditions
Kipimo: 0.5–1.5 kg per cubic meter of lightweight concrete
Utangamano: Mixes easily with ordinary Portland cement and common admixtures
Hifadhi: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

Wakala huyu wa kutoa povu huunda dhabiti, Bubbles hewa sare katika mchanganyiko halisi. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Bila wao, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, nguzo, mihimili, na vipengele vya precast. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Ajenti wa Kutoa Mapovu ya Zege: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, dari za paa, paneli za ukuta, and road sub-bases. It saves material costs and eases transport and handling. Pamoja, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Wasifu wa Kampuni

Sisi ni kiongozi wa kimataifa katika saruji nyepesi na ufumbuzi wa hali ya juu wa povu. Inajulikana ulimwenguni kote kwa kujitolea kwake kufanya utafiti, uvumbuzi, na utaalamu uliotumika, tumekuwa tukitoa masuluhisho ya povu yaliyotengenezwa tangu mwanzoni mwa 2012.

Tunaweza kusambaza mchanganyiko wa saruji ya hali ya juu na bidhaa zinazohusiana na zege povu kote ulimwenguni.

Kampuni hiyo ina idara ya kitaalamu ya kiufundi na idara ya usimamizi wa ubora, maabara yenye vifaa vya kutosha, na iliyo na vifaa vya hali ya juu vya upimaji na kituo cha huduma kwa wateja baada ya mauzo.

Ikiwa una nia, tafadhali jisikie huru na wasiliana nasi.

Malipo

T/T, Muungano wa Magharibi, Paypal, Kadi ya Mkopo nk.

Usafirishaji

Kwa hewa, kwa bahari, kwa kujieleza, kama wateja wanavyoomba.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Maswali Yanayoulizwa Mara Kwa Mara

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Kwa nini utumie wakala wa povu halisi?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Si mara zote. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.