Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, kim ki estab atravè mwayen fizik oswa chimik. Lè kim sa a byen melanje ak sispansyon ki baze sou siman (siman, vole sann, elatriye.) ak geri natirèlman oswa ak vapè, li fòme yon nouvo materyèl ki lejè-konkrè kim-entèn plen ak anpil selil lè fèmen.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Segondè kim miltiplikasyon rapò: Segondè rapò miltiplikasyon kim pèmèt pou dilution anvan ou itilize. Yon kilogram nan konsantre jenere yon gwo volim nan kim inifòm, bay yon gwo ekonomi.

2. Bonjan estabilite kim: Pwodui fleksib, inifòm mi kim amann ki reziste tonbe oswa kraze. Efektivman reziste presyon nan sispansyon siman, asire selil lè endepandan ak sele nan pwodwi fini a.

3. Inifòm ak Fine Pore Estrikti: Konkrè kim nan montre yon estrikti ideyal entèn nan fèmen esferik mikwo-porositë, garanti pwopriyete fizik siperyè.

4. Ba Konsomasyon Materyèl: Reyalize dansite ekivalan ak klas fòs ak pi ba dòz pase pwodwi mache estanda, diminye depans yo.

5. Ekolojik-zanmi ak san danje: Fòmasyon net, ki pa toksik, san odè, ak ki pa korozivite, pa gen okenn domaj nan anviwònman an oswa sante moun. Klasifye kòm yon materyèl bilding vèt.

6. Adaptabilite lajè: Ekselan konpatibilite ak siman divès kalite (ki gen ladan siman Portland òdinè ak siman aluminate) ak melanj. Aksyon kimen rapid ak estabilite kim pwolonje.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Espesifikasyon pwodwi

Mold Release Agent

Aparans: Klè nan limyè amber likid
Solid kontni: 25–30%
Valè pH: 6.5–8.0 (in ready-to-use form)
Rapò dilusyon: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Konpatibilite: Works well with steel, bwa, vèr, ak kofraj plastik
Depo: Kenbe nan yon fre, dry place between 5°C and 35°C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Ajan kimen konkrè

Aparans: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
Valè pH: 7.0–9.0
Rapò ekspansyon kim: 20:1 pou 30:1 (volume of foam to volume of solution)
Estabilite kim: Holds structure for over 60 minutes under standard test conditions
Dòz: 0.5–1.5 kg per cubic meter of lightweight concrete
Konpatibilite: Mixes easily with ordinary Portland cement and common admixtures
Depo: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

Ajan kimen sa a kreye ki estab, bul lè inifòm nan melanj konkrè. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. San yo pa yo, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, kolòn, travès, ak eleman prefabrike. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Ajan kimen konkrè: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, tabliye do kay, panno miray yo, and road sub-bases. It saves material costs and eases transport and handling. Plus, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Konpayi Profile

Nou se lidè mondyal nan konkrè ki lejè ak solisyon avanse kim enjenieri. Li te ye globalman pou angajman li nan rechèch, inovasyon, ak ekspètiz aplike, nou te bay solisyon kim enjenyè depi kòmansman ane 2012 la.

Nou ka bay bon jan kalite melanj konkrè ak pwodwi ki gen rapò ak konkrè kim nan tout mond lan.

Konpayi an gen yon depatman teknik pwofesyonèl ak depatman sipèvizyon kalite, yon laboratwa byen ekipe, ak ekipe ak ekipman tès avanse ak sant sèvis kliyan apre-lavant.

Si w enterese, tanpri ou lib epi kontakte nou.

Peman

T/T, Western Union, Paypal, Kat kredi elatriye.

chajman

Pa lè, pa lanmè, pa eksprime, jan kliyan mande.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Kesyon yo poze souvan

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Pa toujou. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.