Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, stabilna pjena fizičkim ili hemijskim putem. Kada se ova pjena temeljito pomiješa sa cementnom suspenzijom (cement, leteći pepeo, itd.) i izliječiti prirodnim putem ili parom, formira novi lagani materijal – pjenasti beton – iznutra ispunjen brojnim zatvorenim zračnim ćelijama.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Visok omjer umnožavanja pjene: Visok omjer umnožavanja pjene omogućava razrjeđivanje prije upotrebe. Jedan kilogram koncentrata stvara veliku količinu jednolične pjene, pružajući značajne uštede troškova.

2. Jaka stabilnost pjene: Proizvodi otporan, ravnomjerno fini zidovi od pjene koji su otporni na urušavanje ili lomljenje. Efikasno podnosi pritisak cementne suspenzije, osiguravajući nezavisne i zatvorene zračne ćelije unutar gotovog proizvoda.

3. Uniformna i fina struktura pora: Pjenasti beton pokazuje idealnu unutrašnju strukturu zatvorenih sfernih mikropora, garantujući vrhunska fizička svojstva.

4. Niska potrošnja materijala: Postiže ekvivalentne stepene gustine i jačine uz nižu dozu od standardnih proizvoda na tržištu, smanjenje troškova.

5. Ekološki prihvatljiv i siguran: Neutralna formulacija, netoksičan, bez mirisa, i nekorozivna, ne šteti životnoj sredini ili ljudskom zdravlju. Klasifikovan kao zeleni građevinski materijal.

6. Široka prilagodljivost: Odlična kompatibilnost sa raznim cementima (uključujući obični portland cement i aluminatni cement) i primesa. Brzo djelovanje pjene sa produženom stabilnošću pjene.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Specifikacije proizvoda

Mold Release Agent

Izgled: Bistra do svijetlo jantarna tečnost
Sadržaj čvrstih materija: 25–30%
pH vrijednost: 6.5–8.0 (in ready-to-use form)
Dilution Ratio: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Kompatibilnost: Works well with steel, drvo, stakloplastike, i plastične oplate
Skladištenje: Držite na hladnom, suhom mjestu između 5°C i 35°C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Sredstvo za pjenjenje betona

Izgled: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH vrijednost: 7.0–9.0
Omjer ekspanzije pjene: 20:1 to 30:1 (volume of foam to volume of solution)
Stabilnost pjene: Zadržava strukturu za više vremena 60 minutes under standard test conditions
Doziranje: 0.5–1.5 kg per cubic meter of lightweight concrete
Kompatibilnost: Mixes easily with ordinary Portland cement and common admixtures
Skladištenje: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

Ovo sredstvo za pjenjenje stvara stabilan, ujednačeni mjehurići zraka u betonskim mješavinama. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Bez njih, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, kolone, grede, i prefabricirani elementi. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Sredstvo za pjenjenje betona: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, krovne palube, zidne ploče, and road sub-bases. It saves material costs and eases transport and handling. Plus, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Profil kompanije

Mi smo globalni lider u lakom betonu i naprednim rješenjima od pjene. Globalno poznat po svojoj posvećenosti istraživanju, inovacija, i primenjenu ekspertizu, nudimo konstruirana rješenja pjene od početka 2012. godine.

Možemo isporučiti visokokvalitetne dodatke za beton i proizvode povezane s pjenastim betonom širom svijeta.

Kompanija ima stručno tehničko odjeljenje i odjel za nadzor kvaliteta, dobro opremljenu laboratoriju, i opremljen naprednom opremom za testiranje i servisnim centrom nakon prodaje.

Ako ste zainteresovani, slobodno nas kontaktirajte.

Plaćanje

T/T, Western Union, Paypal, Kreditna kartica itd.

Isporuka

Zrakom, morem, ekspresno, po zahtevu kupaca.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Često postavljana pitanja

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Ne uvek. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.