Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, 물리적 또는 화학적 수단을 통해 안정된 거품. 이 폼을 시멘트계 슬러리와 완전히 혼합하면 (시멘트, 비산회, 등.) 자연적으로 또는 증기로 치료, 내부에 수많은 폐쇄형 기포가 채워진 새로운 경량 소재인 폼 콘크리트를 형성합니다..

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. 높은 거품 증식 비율: 높은 거품 증식율로 사용 전 희석 가능. 1kg의 농축액으로 대량의 균일한 거품이 생성됩니다., 상당한 비용 절감 효과 제공.

2. 강력한 폼 안정성: 탄력있는 생산, 붕괴나 파손에 저항하는 균일하고 미세한 폼 벽. 시멘트 슬러리의 압력을 효과적으로 견뎌냅니다., 완제품 내에서 독립적이고 밀봉된 공기 셀을 보장합니다..

3. 균일하고 미세한 기공 구조: 폼 콘크리트는 폐쇄된 구형 미세 기공의 이상적인 내부 구조를 나타냅니다., 우수한 물리적 특성 보장.

4. 낮은 재료 소비: 표준 시장 제품보다 더 낮은 복용량으로 동등한 밀도 및 강도 등급을 달성합니다., 비용 절감.

5. 친환경적이고 안전함: 중립 제형, 무독성, 냄새 없는, 부식성이 없고, 환경이나 인간의 건강에 해를 끼치지 않는 것. 녹색건축자재로 분류.

6. 폭넓은 적응성: 다양한 시멘트와의 상용성이 우수함 (일반 포틀랜드 시멘트, 알루미네이트 시멘트 포함) 및 혼합물. 확장된 거품 안정성으로 신속한 거품 발생 작용.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

제품 사양

Mold Release Agent

모습: 맑거나 연한 호박색 액체
고체 함량: 25–30%
pH 값: 6.5-8.0 (in ready-to-use form)
희석비율: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
호환성: Works well with steel, 목재, 유리섬유, and plastic formwork
저장: 서늘한 곳에 보관하세요, 5°C~35°C 사이의 건조한 장소; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

콘크리트 발포제

모습: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH 값: 7.0–9.0
폼 팽창비: 20:1 에게 30:1 (volume of foam to volume of solution)
거품 안정성: Holds structure for over 60 minutes under standard test conditions
복용량: 0.5–1.5 kg per cubic meter of lightweight concrete
호환성: Mixes easily with ordinary Portland cement and common admixtures
저장: Store between 0°C and 40°C; avoid freezing; usable up to 12 개봉하지 않은 경우 개월

이 발포제는 안정한, 콘크리트 혼합물의 균일한 기포. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. 그들 없이는, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, 기둥, 광선, 및 프리캐스트 요소. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

콘크리트 발포제: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, 지붕 데크, 벽 패널, and road sub-bases. It saves material costs and eases transport and handling. 을 더한, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

회사 프로필

우리는 경량 콘크리트 및 고급 엔지니어링 폼 솔루션 분야의 글로벌 리더입니다.. 연구에 대한 헌신으로 전 세계적으로 알려져 있습니다., 혁신, 및 응용 전문 지식, 우리는 2012년 초부터 엔지니어링 폼 솔루션을 제공해 왔습니다..

우리는 고품질의 콘크리트 혼화제 및 발포 콘크리트 관련 제품을 전 세계에 공급할 수 있습니다..

회사에는 전문 기술 부서와 품질 감독 부서가 있습니다., 시설이 잘 갖춰진 실험실, 첨단 테스트 장비와 애프터 서비스 센터를 갖추고 있습니다..

관심이 있으시면, 부담없이 문의해 주세요.

지불

티/티, 웨스턴 유니온, 페이팔, 신용카드 등.

선적

항공으로, 바다로, 급행으로, 고객의 요청에 따라.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

자주 묻는 질문

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

항상 그런 것은 아니다. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.