Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, 物理的または化学的手段による安定した泡. この泡をセメント系スラリーとよく混ぜ合わせると (セメント, フライアッシュ, 等) 自然硬化または蒸気硬化, 内部が多数の密閉気泡で満たされた新しい軽量素材である発泡コンクリートを形成します。.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. 高い発泡倍率: 発泡倍率が高く、希釈して使用可能. 1kgの濃縮物から大量の均一な泡が生成されます。, 大幅なコスト削減を実現.

2. 強い泡の安定性: 弾力性を生み出す, 均一に細かい泡の壁が崩れたり壊れたりしにくい. セメントスラリーからの圧力に効果的に耐えます, 最終製品内に独立した密閉された空気セルを確保.

3. 均一で微細な細孔構造: 発泡コンクリートは、閉じた球状の微細孔の理想的な内部構造を示します。, 優れた物性を保証.

4. 材料の消費量が少ない: 標準的な市場製品よりも少ない投与量で同等の密度および強度グレードを達成, コストを削減する.

5. 環境に優しく安全: 中性処方, 無毒, 無臭, 非腐食性, 環境や人間の健康に害を及ぼさない. グリーン建材として分類.

6. 幅広い適応性: 各種セメントとの相溶性に優れています (普通ポルトランドセメント、アルミネートセメントを含む) および混和剤. 素早い発泡作用と長い泡安定性.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

製品仕様

Mold Release Agent

外観: 透明から淡い琥珀色の液体
固形分含有量: 25–30%
pH値: 6.5–8.0 (in ready-to-use form)
希釈率: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
互換性: Works well with steel, 木材, グラスファイバー, and plastic formwork
ストレージ: 涼しく保ちます, dry place between 5°C and 35°C; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

コンクリート発泡剤

外観: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH値: 7.0–9.0
発泡倍率: 20:1 に 30:1 (volume of foam to volume of solution)
泡の安定性: 構造を長期間保持します 60 minutes under standard test conditions
投与量: 0.5–1.5 kg per cubic meter of lightweight concrete
互換性: Mixes easily with ordinary Portland cement and common admixtures
ストレージ: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

この発泡剤は安定した状態を作ります。, コンクリート混合物中の均一な気泡. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. 彼らなしでは, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, 列, 梁, およびプレキャスト要素. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

コンクリート発泡剤: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, ルーフデッキ, 壁パネル, and road sub-bases. It saves material costs and eases transport and handling. プラス, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

会社概要

当社は、軽量コンクリートと高度な人工発泡ソリューションの世界的リーダーです。. 研究への取り組みで世界的に知られている, 革新, そして応用された専門知識, 当社は 2012 年代初頭から人工発泡ソリューションを提供してきました。.

高品質なコンクリート混和剤および発泡コンクリート関連製品を世界中に供給できます。.

会社には専門の技術部門と品質監督部門があります。, 設備の整った研究室, 高度な試験設備とアフターサービスセンターを備えています.

興味があれば, お気軽にお問い合わせください.

支払い

T/T, ウエスタンユニオン, ペイパル, クレジットカードなど.

出荷

飛行機で, 海によって, 速達で, 顧客の要求に応じて.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

よくある質問

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

なぜコンクリート発泡剤を使用するのか?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

常にではありません. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.