Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, foam e tsitsitseng ka mekgoa ya mmele kapa ya dikhemikhale. Ha foam ena e tsoakane ka botlalo le seretse se thehiloeng ho samente (samente, fofa molora, etc.) ebile e phekotsoe ka tlhaho kapa ka mouoane, e etsa ntho e ncha e bobebe—konkreite ea foam—ka hare e tletseng lisele tse ngata tse koetsoeng tsa moea.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Karolelano e phahameng ea ho atisa Foam: Karo-karolelano e phahameng ea foam e lumella ho hlapolloa pele ho sebelisoa. K'hilograma e le 'ngoe ea concentrate e hlahisa molumo o moholo oa foam e tšoanang, ho boloka litšenyehelo tse kholo.

2. Botsitso bo matla ba Foam: E hlahisa ho mamella, mabota a foam a matle ka tsela e tshwanang a hananang le ho putlama kapa ho thubeha. E mamella ka katleho khatello e tsoang ho slurry ea samente, ho netefatsa lisele tsa moea tse ikemetseng le tse tiisitsoeng ka har'a sehlahisoa se felileng.

3. Sebopeho sa Pore e sa Tšoaneng le e Ntle: Konkreite ea foam e bonts'a sebopeho se setle sa kahare sa li-micro-pores tse koetsoeng, ho netefatsa thepa e phahameng ea 'mele.

4. Tšebeliso e Tlase ea Lintho: E fihlella maemo a lekanang le a matla ka litekanyetso tse tlase ho feta lihlahisoa tse tloaelehileng tsa mmaraka, ho fokotsa litšenyehelo.

5. Eco-friendly ebile e bolokehile: Tlhaho e sa nke lehlakore, e senang chefo, e senang monko, ebile e sa senyehe, e sa hlahiseng kotsi tikolohong kapa maphelong a batho. E khethiloe e le thepa ea kaho e tala.

6. Ho ikamahanya le maemo ho pharaletseng: E lumellana hantle le samente e fapaneng (ho kenyelletsa samente e tloaelehileng ea Portland le samente ea aluminate) le metsoako. Ketso e potlakileng ea ho phoka lekobo le botsitso bo atolositsoeng ba foam.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Litlhaloso tsa Sehlahisoa

Mold Release Agent

Ponahalo: Mokelikeli o hlakileng oa amber
Litaba tse tiileng: 25-30%
pH Boleng: 6.5–8.0 (in ready-to-use form)
Karolelano ea Dilution: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Ho lumellana: Works well with steel, lehong, fiberglass, le polasetiki formwork
Polokelo: Boloka sebakeng se phodileng, sebaka se ommeng pakeng tsa 5°C le 35°C; shelf life of 12 likhoeli ka setshelo sa pele se tiisitsoeng

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Konkreite Foaming Agent

Ponahalo: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH Boleng: 7.0–9.0
Karolelano ea Katoloso ea Foam: 20:1 ho 30:1 (volume of foam to volume of solution)
Foam Stability: Holds structure for over 60 minutes under standard test conditions
Tekanyetso: 0.5–1.5 kg per cubic meter of lightweight concrete
Ho lumellana: Mixes easily with ordinary Portland cement and common admixtures
Polokelo: Store between 0°C and 40°C; qoba ho hatsela; usable up to 12 months if unopened

Moemeli ona oa ho foamisa o etsa hore ho be le botsitso, li-bubble tsa moea tse ts'oanang ka metsoako ea konkreite. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Ntle ho tsona, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, litšiea, maballo, le likarolo tsa precast. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Konkreite Foaming Agent: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, marulelo a marulelo, marako diphanele, and road sub-bases. It saves material costs and eases transport and handling. Hape, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Boemo ba Khoebo

Re moetapele oa lefats'e oa konkreite e bobebe le tharollo ea foam e tsoetseng pele. E tsebahala lefatšeng ka bophara ka boitlamo ba eona ba ho etsa lipatlisiso, popontshwa, le botsebi bo sebelisitsoeng, esale re fana ka tharollo ea foam e entsoeng ka boenjiniere ho tloha qalong ea 2012.

Re ka fana ka motsoako oa boleng bo holimo oa konkreite le lihlahisoa tse amanang le konkreite ea foam lefatšeng ka bophara.

Khampani e na le lefapha la litsebi tsa theknoloji le lefapha la tlhokomelo ea boleng, laboratori e nang le lisebelisoa hantle, hape e na le lisebelisoa tse tsoetseng pele tsa tlhahlobo le setsi sa litšebeletso tsa bareki ka mor'a thekiso.

Haeba u thahasella, ka kopo ikutloe u lokolohile 'me u ikopanye le rona.

Tefo

T/T, phetiso ea chelete e bitsoang western union, Paypal, Credit Card etc.

Thomello

Ka moea, ka leoatle, ka Express, joalo ka ha bareki ba kopa.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Lipotso Tse Botsoang Khafetsa

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Eseng kamehla. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.